SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.
High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
"Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
Set screw goes into a metal tray that evenly distributes pressure to protect the body from over-tightening of the set screw
Combination of visual and mechanical polarity protection ensures correct installation of batteries
Light designed to not power on if batteries are installed incorrectly
3 "AA" alkaline batteries reduce battery and recycling costs by 25%
C4® LEDtechnology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours
Sealed switch design protects it from corrosion caused by battery leakage
One body electronic LED module mechanically attached to electronic assembly
Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
Regulated run time provides consistent performance throughout battery life
O-ring sealed, dust-proof, water-tight enclosure
IP67 rated for dust-tight and waterproof to 1 meter for 30 minutes; IPX4 for water spray
3 meter impact resistance tested
Ergonomically designed for maximum hand comfort
7.00 in. (17.78 cm); 7.5 oz (213 grams) with batteries (included)
Limited Lifetime Warranty
ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum operating temperature of <135�C.
SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.
High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
"Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
Set screw goes into a metal tray that evenly distributes pressure to protect the body from over-tightening of the set screw
Combination of visual and mechanical polarity protection ensures correct installation of batteries
Light designed to not power on if batteries are installed incorrectly
3 "AA" alkaline batteries reduce battery and recycling costs by 25%
C4® LEDtechnology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours
Sealed switch design protects it from corrosion caused by battery leakage
One body electronic LED module mechanically attached to electronic assembly
Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
Regulated run time provides consistent performance throughout battery life
O-ring sealed, dust-proof, water-tight enclosure
IP67 rated for dust-tight and waterproof to 1 meter for 30 minutes; IPX4 for water spray
3 meter impact resistance tested
Ergonomically designed for maximum hand comfort
7.00 in. (17.78 cm); 7.5 oz (213 grams) with batteries (included)
Limited Lifetime Warranty
ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum operating temperature of <135�C.
